Clock Hotpad - part 2

The last round in the main color (from the previous post) was essentially:

* dc1, dc twice into same st, dc 1 * 12 times

for 48 sts around.

For the next round (in a contrasting color, burnt orange), we'll need to identify the stitches from two rounds before (Round 3) into which we dc'ed twice (in Round 4).

Round 5: (in contrasting color) dc in each st around plus work an elongated dc into each stitch in Round 3 that has 2 dc's in it. Slip stitch to end the round (60 sts). Break yarn and weave in ends.

We can start anywhere. But, let's start the next round by dc'ing into a first dc after the dc twice into same st (in the previous rnd).

Put a slip knot around the hook -- making sure to have a long enough loose end to weave in at the end of the round. Wrap the yarn around the hook once. Place the hook through the top of the dc from the previous round. Then continue to make a dc as usual.

Double crochet into the next 2 sts.

Then make an elongated dc.... Wrap the yarn around the hook once. Place the hook through the top of the same stitch in Round 3 that has 2 dc's in it (in Round 4). Wrap the yarn around the hook and pull it through (shown in the picture). Then continue to make a dc as usual.

Double crochet in each of the next 4 sts before making another elongated dc. Continue this pattern until reaching the start of the round. (Since there were 12 increases in the last round, there will be 12 elongated dc's in this round.)

Slip stitch into the top of the first dc of the round.

Finally, cut the yarn and weave in the two ends.

Note: We made 12 increases this round -- just like all the previous rounds. Only, these increases were made by working an elongated dc instead of dc'ing twice into the same st.

Round 6 (in main color): * dc4, dc2 in same space * 12 times. Slip stitch to end round (72 sts). Break yarn and weave in ends.

Edited to change Round 6 repeat from dc5 to dc4 (on Sept 30, 2010).

Start this round just as the previous round. Again, it makes no difference where we start the round. When reaching the end of the round, slip stitch into the top of the first dc of the round. Then cut the yarn and weave in both ends. The hotpad is finished.

Note: We could make more of these elongated dc rounds for a larger hotpad. The only restriction is that an elongated dc round needs to have a "dc2 in same space" round preceding it.

To make an elongated dc round after Round 6:

Round 7 (optional): (in perhaps another contrasting color) dc in each st around plus work an elongated dc into each stitch in Round 5 that has 2 dc's in it. Slip stitch to end the round (84 sts). Break yarn and weave in ends.

Clock Hotpad - part 1

a circular dc hotpad

For this hotpad, I'm going to break a rule of thumb -- the one on how to substitute for a dc. Usually one substitutes a ch3 for the first dc of a round. I find it nicer in cases like this to substitute "sc1, ch2" instead -- for the simple reason that it looks more like a dc.

This hotpad begins just like the last dc hotpad -- with a ch-4 loop. The increase scheme is exactly the same as before. The "magic" number is still 12. The big difference is that this one is knit circularly instead of in a spiral.

Materials:
size 7 hook (4.5 mm)
2 skeins worsted-weight yarn (I used leftover Peaches & Creme white for the main color and burnt orange for the contrasting color.)

Finished size: 6 1/2" in diameter

Directions:
Using main color, make a ch-4 loop.

(Make a slip knot. ch 4. Slip stitch into 1st chain -- the slip knot -- to complete the loop.)

Rnd 1: sc1, ch2, dc11 into loop. Slip stitch into second ch st of rnd.

In other words, sc1 in the loop. Then ch2. Then dc11 in the loop. As before, when coming to the end of the round, hold the tail next to the chain sts and dc around both the tail and the chain sts to hide the tail.

Finally, since this is circular, make a slip stitch -- to end the round. The first picture show a completed first round.

Round 2: sc1, ch2, dc1 into same st, dc2 into next st 11 times. Slip st into 2nd ch st to end round. (24 sts)

For Round 2, sc1 into the next st. Then ch 2. Then dc into the same st as for the sc. (The second picture shows this.) Then, dc2 into each of the next 11 sts. The round ends as before with a slip stitch.

Round 3: sc1, ch2, dc1 into same st, dc1, * dc2 into next st, dc 1 * 11 times. Slip st into 2nd ch st to end round. (36 sts)

"sc1, ch2, dc1 into same st" is a substitute for dc2 into the same st.

Round 4: sc1, ch2, dc2 into next st, dc 1, * dc 1, dc2 into next st, dc 1 * 11 times. Slip st into 2nd ch st to end round. (48 sts)

"sc1, ch2, dc2 into next st" is a substitute for dc1, then dc2 into next st.

Cut yarn. Weave in loose end.

Next time, we'll start crocheting with a contrasting color, burnt orange. In crocheting, it's often easier to cut the yarn and weave in the end than try to try to hide the yarn when starting a contrasting color.

Spiral DC hotpad -- part 2

-- with a "faux slip stitch" --
(The French word "faux" is pronounced like the English word "foe". And, it seems to me, in some cases such as the one here, the imitation is better than the original.)

In the last post, we worked the spiral dc hotpad to the end of the sixth round.

The yarn I was using was left over from a knit dishcloth. So, I decided to crochet this one until running out of yarn.

I did a couple repeats of the pattern for Round 7:

Round 7: * dc twice into same st, dc 5 * 12 times (84 sts)

Then to make the hotpad more circular and less "spiral-ry", I did essentially what I did at the beginning of the spiral (though in the opposite order) -- one half double crochet, two single crochet, and finally a slip stitch.

The first picture shows these stitches plus the beginning of what I'm calling a faux slip stitch -- for lack of a better term. The first time I saw the stitch was at the end of Cat Bordhi's video on Jeny's bind off (knitting).

To work the "faux slip stitch", first cut the yarn. Then draw the yarn through the top of the next stitch (as in the first picture).

After that, draw the loose end through the back loop of the previous stitch (second picture).

Finally, weave in the loose end.

Spiral DC Hotpad - part 1

Double crochet stitches give a hotpad a different look. This hotpad is worked with a size 7 hook (4.5 mm) and leftover Peaches & Creme yarn (Mar-Di-Gras). It's 7" in diameter.

12 is the "magic" number here. We'll be starting with 12 sts for the first round and increasing by 12 stitches for each round after that.

Directions for the hotpad are in bold. The hotpad starts with a chain loop.

Make a ch 4 loop.

In other words, make a slip knot. ch 4. Slip stitch into 1st chain (ie, the slip knot) to complete the loop.

Then since a dc st is fairly tall, we'll start the first round with a sc and then a hdc. (A hdc, half double crochet st, starts out just like a dc. But, instead of pulling the yarn through 2 loops at a time, one pulls the yarn through all 3 loops to end the stitch. NexStitch has a video of the hdc st.)

Round 1: sc1, hdc1, dc10 in ch loop. (12 sts)

The second picture shows the first 3 sts of the round. When coming to the end of the round, hold the tail next to the chain sts and dc around both the tail and the chain sts in order to hide the tail.

Round 2: dc twice into same st 12 times. (24 sts)
Round 3: * dc twice into same st, dc 1 * 12 times (36 sts)

The third picture shows the hotpad after Round 3. Notice the difference in height between rounds.

Round 4: * dc 1, dc twice into same st, dc 1 * 12 times (48 sts)

Round 5: * dc twice into same st, dc 3 * 12 times (60 sts)

Round 6: * dc 2, dc twice into same st, dc 2 * 12 times (72 sts)

We'll finish the hotpad in the next post.

Double Crochet

For the next row of the kitchen towel hanger, we'll use double crochet stitches.

The double crochet stitch is about twice the height of a single crochet stitch. (It is called a triple or treble crochet stitch in England and several Commonwealth countries and is then abbreviated tc or 3-c.) In American notation, it is abbreviated dc. The photo at the right is from the American Thread Company booklet and describes the stitch.

In the photo, you can see both the right sides of dc sts (the top row) and the wrong sides (the bottom row).

NexStitch has a video of the stitch. The video shows the dc being made in a chain st (with the hook being put under just one loop of thread). In the pattern we're working on, the dc is made on top of a sc and so (since we want a flat effect instead of a rib effect), put the hook under both loops at the top of the sc in Step 2 below.

The single crochet stitch took 2 steps to complete. The double crochet stitch takes 4 steps. As with most, if not all, crochet sts, one starts with a single loop around the hook -- and ends with a single loop around the hook.

Step 1. Yarn over (yo). That is, wrap the thread around the hook (from the back over the hook to the front). There are 2 loops on the hook.

Step 2. With the yarn in back, put the hook through the top of the desired st (-- or into a chain st, or chain loop, or terry cloth as you did for a single crochet st), yo, and draw the thread through. There are now 3 loops on the hook.

The picture at the right shows the yo in Step 1 and the hook through the top of the stitch that I wanted to dc into. (I skipped 2 sts between dc's because that's what the pattern I'm making calls for.)

Step 3. Yarn over and draw the thread through 2 loops on the hook. There are now 2 loops on the hook.

Step 4. Yarn over and draw the thread through 2 loops. There is now only 1 loop on the hook, and the double crochet is complete.

The picture at the right shows the yo in Step 4. You'll notice that bottom half of the stitch is already made.

-----------

Now to get back to the terry cloth dish towel that we were working on. Row 3 is a row of dc's and ch's -- to give an open mesh effect -- as can be seen in the second and third pics. Here are directions for Row 3:

Row 3. Turn, ch3, dc in next st in previous row, *ch 1, skip 2, dc 1* across, dc in last st.

To explain these steps:
Turn -- Turn the fabric so that now the RS is facing you. We were working on the WS.

Ch 3: Chain 3, as a substitution for a dc.

dc in next st in previous row: Don't dc in the last st of the last row but rather one stitch over. (Sometimes, one just writes dc instead of dc 1.)

*ch 1, skip 2, dc 1* The pattern that is repeated across the row is to first chain 1, the double crochet in the 3rd stitch over from the last stitch crocheted into (to skip 2 sts).

Finally, the pattern will, in most likelihood, not work out exactly. So, you can fudge by skipping only 1 st before making the last two dc's of the row or else by ending dc, skip 1, dc. -- As was the case in the last row, there are fewer sts across than in the previous row.